Bicycle Parts

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

The Descendant 6K DUB crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

Another great value in the Terry line, the Butterfly Cromoly Gel takes comfort up a level with the addition of a thin gel layer along the top of the saddle. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. A wonderful saddle for endurance/distance riders, the Butterfly Cromoly Gel is wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails. - Smooth Dura-tek cover with printed accent - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 262mm x 155mm - Weight: 345 grams; 12.2 ounces - Rails: FeC alloy

A layer of gel across the top gives an additional level of relief to the Cite X Gel. This saddle was designed for the recreational rider who spends a half day on the bike or less, rides nearly upright with lots of weight against the saddle, prefers the closest thing to a pillow, or has significant lower back pain. A completely seamless, heavily contoured top with large cutaway is guaranteed to hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices or additional weights. They also help eliminate vibrations from road or surface that ordinarily get transferred straight to the spine. - Length x width: 249mm x 175mm - Weight: 454 g / 16.0 oz.

Terry's Cite X saddle was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 175mm - Weight: 425 grams; 15 ounces - Rails: Satin steel

A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surfaces that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless, synthetic top - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer for added comfort - Length x width: 274mm x 173mm - Weight: 479 grams; 16.9 ounces - Rails: steel

The Liberator Elite is designed for the elite touring rider who needs all-day comfort, demands premium features, and wants the optimal balance of relief and saddle weight. This saddle has a wider cutaway than the other Liberators, providing additional relief for longer distances. It also features a premium leather cover for durability and lighter weight Cr-mo rails. The Elite also has a narrower profile, but doesn’t sacrifice on comfort. It's a wonderful choice for serious touring riders. - Length x width: 249mm x 163mm - Weight: 340 g / 12.0 oz.

With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. One notch higher on the comfort scale, Terry's Liberator X Gel for women is as soft a touring saddle as you should buy if you're a pretty serious rider. Lots of people make the mistake of thinking that a really soft, squishy saddle is the solution to their seat woes, but after an hour they begin squirming because the pressure is spread evenly across all areas. We've engineered this saddle to give you all the softness you need, with good support below. The ergonomically-shaped back panel of the Liberator reduces the points of stitching contact between you and your saddle. A wider, contoured rear and large cutaway with extended depression off the back also add to the structural comfort. - Perforated black Dura-tek cover with gray stitching - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 163mm - Weight: 411 grams; 14.5 ounces - Rails: Satin steel

With hundreds of thousands on the road, the Liberator has earned its reputation as one of the most comfortable saddles for men. We recommend it to those experiencing a variety of comfort issues. Lengthy rides or touring where body position is slightly more upright requires a saddle that's anatomically supportive and has a higher degree of comfort. We designed the Liberator Y Gel with all the goodness of the Liberator but with the addition of a thin layer of gel across the top. It has a wide rear for support of sit bones, a large cutaway through the center, a relief channel off the back for pressure relief, and a shaped back panel that reduces the points of stitching contact. - Black perforated Dura-tek cover with black stitching - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer for added comfort - Length x width: 269mm x 173mm - Weight: 470 grams; 16.6 ounces - Rails: Satin steel

The Raven Ti Gel saddle features strategically positioned gel under sit bones for an increased level of comfort. It was designed using the latest in vacuum molding technology, allowing for a sleek, seam-free contact surface and clean integration with the saddle's substrate base. The benefit – no chafing, no hot spots. It has a narrow profile with dropped nose shaping in front that helps eliminate pressure and a flat rear that supports your sit bones. We've also achieved the ideal balance of foam padding with an ergonomic relief channel, making it a very comfortable option for those looking to minimize bulk. The Raven is a slightly longer saddle that gives you more fore-aft positioning range on the bike and it comes with a smooth, durable synthetic cover. - Smooth, matte black Dura-tek cover - Pressure relief channel - Drop nose design for the front of saddle comfort - Strategically positioned gel under sit bones (O-zone) - Length x width: 265mm x 150mm - Weight: 266 grams; 9.38 ounces - Rails: CRN-Ti

- High Performance Brake Pads - Disc Pad Material: Organic

- Forged aluminum arms - 102mm arm length - 158g

- V-brake or cantilever compatible - Forged alloy levercast alloy bracket - 220g per pair

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

TRP Disc Brake Pads - Sold as one pair per wheel - Compound most effective in dry conditions, may wear quickly in wet/muddy conditions - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors - Compatible with Tektro Draco, Auriga, and Gemini (models HD-M740/M730/M520/M521/M510/M500/M501, HD-M290/M291/M285/M286, HD-T710/T520/T530/T290/T285/T525, HD-E715/E530/E525/E520/E500, MD-M500/M300/M280, and MD-C510/C40)

Adapters to convert your flat mount frame or fork to post mount. - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - Deore BR-M575,BR-M525,BR-M515,BR-T615 - LX BR-T675 - Alivio BR-M4050 - Acera BR-M3050 - Altus BR-M375,BR-M365,BR-M315 - BR-M506 - BR-M505 - BR-MT500 - BR-M495 - BR-M486 - BR-M485 - BR-M475 - BR-M465 - BR-M447 - BR-M446 - BR-M445 - BR-M416 - BR-M415 - BR-MT400 - BR-M395 - BR-M355 TRP - Hylex - HY/RD - Spyre SLC - Spyre - Spyke - Dash Sport Tektro - Orion SL HD-M740 - Orion HD-M730,HD-M725 - Gemini SL HD-M520 / M521 - Gemini HD-M500 / M501,HD-M510 - Draco2 HD-M352 - HDC330 HD-M330 - Auriga HD-M290 / M291,HD-T530,HD-T525,HD-E530,HD-E525,HD-E520,HD-E500 - Aquila MD-M500 - Aries MD-M300 - MD-M280 - Mira MD-C400 - Volans HD-T710 - Vela HD-T290 - Dorado HD-E715 QUAD - Disc Brake

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM - Guide Ultimate,RSC,RS,R,T

One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.